Fiberblaze/Silicom Denmark FBC2CGG3-STD-8X10G

Product No.: FBC2CGG3-STD-8X10G

Fiberblaze 2x QSFP28 (8x 10GbE) Capture Card, Full Filter, based on Xilinx Ultrascale XCVU080, 16GB DDR4, PCIe Gen 3 x16, full height, 3/4 length

Manufacturer: Fiberblaze/Silicom Denmark

In stock: Usually ships fast, please request the current lead time here

Request a Quote
  • weight 0.30 kg

product description

The Fiberblaze FBC2CGG3-STD-8X10G offers 8 x 10GE network
connectivity and high speed capture to host memory
with zero packet loss and packet processing.
The FBC2CGG3-STD-8X10G card is based on cutting edge Xilinx FPGA
technology, providing packet filtering, advanced
processing, traffic management, load balancing and
host offloading mechanisms.
This high performance hardware platform connects to
10GE using QSFP28 modules, and performs packet
processing, while delivering a sustained throughput to
host memory of up to 224 Gbps.
The card use a single-slot PCIe solution through a 16-
lane PCIe slot. It also features a second PCIe
connector for cable connection to a second PCIe
slot. The second PCIe connector can also serve
as a card-to-card interconnect path to a second
card.
The FBC2CGG3-STD-8X10G is part of the fbCAPTURE family
which provides a powerful and flexible Software API,
as well as standard libpcap integration.
Through the integration of fbCAPTURE API,
applications gain support for all fbCAPTURE cards,
covering Ethernet speeds from 1GE to 10GE.
The fbCAPTURE framework
The fbCAPTURE framework is a combination of FPGA firmware and a software API in C that utilises the full
potential present in a range of FPGA based network interface cards from Fiberblaze. The fbCAPTURE Cards
are designed with a combination of a powerful FPGA and large amounts of high speed onboard memory to
ensure zero packet loss even at line rate performance. The fbCapture API is common for all the capture
cards for 1GE, 10GE line rates. This simplifies system integration greatly, as support for
multiple network rates can be achieved with the same integratio n efforts.

Network Interface
· IEEE standard: IEEE 802.3 10 Gbit/s Ethernet
· Physical interface: 2 x QSFP28 port
· Data rate: 2 x 10 Gbit/s
· Ethernet PHY directly embedded in FPGA for full
packet control
Host Interface
· Physical bus connector: 16-lane PCIe
· PCIe bus type: 16 lane PCIe Gen1/Gen2/Gen3
· Optional 2nd PCIe cable connect
16 lanes via host bifurcation
· PCIe compliant
· 64 logical channels that can be connected to DMA
or egressed to physical output ports
On Board Memory
· On board buffering for application robustness
· 16 GB 64 bit DDR4
Performance
· Capture rate: full line rate, all interfaces
· Capture rate (bursts): full line rate
· Capture rate (sustained): full line rate
· Transmission rate (inline bypass): full line rate
· Transmission rate (daisy chain): full line rate
Latency
· Less than 3 μs to host memory
· Less than 3 μs from host memory to Tx
· Non-blocking sending, allowing user applications
to operate independently
Time Stamping & Sync
· Resolution = 3.2 ns
· Accuracy down to 20 ns
· Daisy chain PPS between multiple cards
· Optional external synchronization: PPS
· Optional PTP IEEE 1588-2008 sync card with RJ45
interface
Configuration
· Dual boot images with automatic fallback to
fail-safe image
· Full firmware upgrades via supplied tools or
fbCAPTURE API
Environment
· Physical dimensions: 3/4 length, standard height
· PCIe: 111 x 254 mm
· Weight: 238g
· Operational power consumption: Less than 39W
· Operating temperature: 0 – 55°C, 30 – 130°F
· Hardware compliance: RoHS, CE
· Passive cooling, with adequate host cooling
· Active cooling solution available
Additional Board Support
· fbCAPTURE API
· On-board temperature sensor
· Multi-color status LEDs
· Link and Activity LEDs for each port

Downloads

fiberblaze silicom fbc2cgg3 datasheet.pdf FBC2CGG3 (1.26 MB)

Fiberblaze Silicom FBC2CGG3 Datasheet


© Copyright STORDIS GmbH

FOLLOW US

LinkedinTwitterFacebookXing